By TLex Introducing the Sinn U212 SDR, A limited edition of 212 units, the U212 was tested and based on European diving equipment standards and was certified by Germanischer Lloyd, Hamburg. It's case is made of high-strength seawater-resistant German submarine steel with TEGIMENT Technology which allows it to be especially scratch-resistant.
Its black bezel with 'Black Hard Coating' is based on the same TEGIMENT technologies as its case. Its sapphire crystal boasts 'Ar-Dehumidifying Technology', which allows it to remain fog free. There's a small 'ar' logo on the dial at 9 o'clock. The watch has been tested to function reliably from –45 °C up to +80°C. Further features include: captive diver's bezel with minute ratcheting, crown at 4 o'clock to prevent pressure on the back of the hand, and water-resistance up to 1000 meters diving depth or 100bar.
From SINN The diving watch U212 is a professional mission timer which uses genuine German submarine steel, a material with extreme seawater-resistance and the highest level of non-magnetic properties. In the movement itself, functional reliability between -45 °C and +80 °C is ensured by the SINN special oil 66-228. And that's not all: with the captive diver's bezel, this diving watch is well-equipped to measure the duration of a dive accurately.
Fogging of the dial poses a safety risk when diving. To prevent this, we use EDR seals. This material, with its extreme chemical resistance and only a quarter of the gas permeability of conventional seals, prevents moisture from diffusing into the diving watch. The scratch-resistance sapphire crystal glass withstands even the highest pressures. The case is equipped with the Ar-Dehumidifying Technology.
ABOVE The Sinn U2 MEISTERBUND III Limited Edition watch for the Japanese domestic market. Its 44mm x 15.5mm German submarine steel case is fitted with a sapphire crystal and a black rotational divers bezel. It is water resistant to 2000 meters. It houses a Swiss automatic, the ETA caliber 2893-2 with 21 jewels and a power reserve of 40 hours. MSRP is 357'000 Yen.Furthers details can be had HERE